Tag Archives: TANABE.

051750L-TANABE

Posted on by

“MAIN COMPONENT: STARTING AIR COMPRESSOR-VLH-43-080640-TANABE COMPRESSORS
” “256001 10035
3- MICROPROCCESSOR
CONTROLL .ER
#1.DRAWING NO: T3PO4354
ASSEMBLY: AIR
COMPRESSOR TASK-1 537J-Y
” TANABE.NA.NA

062324Y-COMPRESSOR

Posted on by

VALVE PLATE 1ST.STAGE SUC.1 TANABE.NA.VZ-6122
VALVE PLATE 1ST.STAGE SUC.2 TANABE.NA.VZ-6142
VALVE PLATE 1ST.STAGE SUC.3 TANABE.NA.VZ-6152
VALVE PLATE 1ST.STAGE DELI.1 TANABE.NA.VZ-6132
VALVE PLATE 1ST.STAGE DELI.2 TANABE.NA.VZ-6162
VALVE PLATE 2ND.STAGE TANABE.NA.VP-2711
VALVE RETAINER SND STAGE S URGENT TANABE.NA.57
VALVE RETAINER SND STAGE D URGENT TANABE.NA.56
VALVE SEAT SPRING 2ND STAGE URGENT TANABE.NA.55
VALVE SPRING 2ND. STAGE TANABE.NA.VP-2715
SUCTION VALVE ASSY 2ND STAGE COMPLETE TANABE.NA.50
VALVE SET BOLT & NUT 2ND STAGE URGENT TANABE.NA.54
CHECK VALVE BODY SF440A TANABE.NA.1
CHECK VALVE SEAT SUS303 TANABE.NA.2
DISK FOR CHECK VALVE TANABE.NA.4/VCB-300000B
VALVE SPRING FOR CHECK VALVE TANABE.NA.5/VCB-300000B
GUARD FOR CHECK VALVE TANABE.NA.3/VCB-300000B

052463C-TANABE

Posted on by

ADJUST SHIM (A)ADJUST SHIM (B)
TANABE PNEUMATIC.NA.9
BEARING
TANABE PNEUMATIC.NA.21
CLAMP WASHER
TANABE PNEUMATIC.NA.24
HEXAGON NUT
TANABE PNEUMATIC.NA.25
IMPELLER
TANABE PNEUMATIC.NA.4
KEYCONNECTING ROD (LP & HP)

TANABE PNEUMATIC.NA.20
DISTANCE RING

TANABE PNEUMATIC.NA.17
CRANK SHAFT

TANABE PNEUMATIC.NA.10
TANABE PNEUMATIC.NA.12
LOCK NUT
TANABE PNEUMATIC.NA.14
O-RING
TANABE PNEUMATIC.NA.15
OIL SEAL
TANABE PNEUMATIC.NA.7
RETAINING RING (C-TYPE)
TANABE PNEUMATIC.NA.19
SEAL HOLDER
TANABE PNEUMATIC.NA.23
SHAFT
TANABE PNEUMATIC.NA.22
SPRING WASHER
TANABE PNEUMATIC.NA.18
STUD BOLT
TANABE PNEUMATIC.NA.11
WASHER
TANABE PNEUMATIC.NA.3
WATER CUTTER
TANABE PNEUMATIC.NA.2
TANABE PNEUMATIC.NA.13
TANABE PNEUMATIC.NA.16
TANABE PNEUMATIC.NA.8

052464C-TANABE

Posted on by

CYLINDER HEAD GASKETGASKET ( COOLER PLATE)
TANABE.NA.75
GASKET SECOND STAGE( COOLER COVER)
TANABE.NA.74
GASKET FIRST STAGE ( COOLER COVER)
TANABE.NA.73
System: WINDLASS/MOORING WINCH W/CHAIN 150 [433_150]
Subsystem: WINDLASS WITH MOORING WINCH NO 1 [4330101]
618KNx9.5M/MIN; 300KNx7.5M/MIN; ELECTRO HYDRAULIC
Maker : NIPPON PUSNES CO/ LT

RETAINING RING
DWG 2A99103; POS 30; DIA 24
NIPPON PUSNES CO.LTD.NA.2A99103-30
CRANK WASHER
TANABE.NA.29
MAIN BEARING
TANABE.NA.26
OIL SCRAPER RING (2ND STAGE)
TANABE.NA.44
PISTON
TANABE.NA.41
PISTON PIN
TANABE.NA.38
PISTON PIN BUSHING
TANABE.NA.36
PISTON RING (1ST STAGE)
TANABE.NA.42
PISTON RING (2ND STAGE)
TANABE.NA.43
RETAINING RING-C TYPE
TANABE.NA.40
SEAL DISK
TANABE.NA.39
TANABE.NA.71